Flexo Ink decoration is done by running products through a flexible photopolymer plate placed on a rotating drum. This process allows for high volume printing.
This efficient and cost-effective decoration method is available on most of the following type products:
- PAPER BAGS
- PLASTIC BAGS
Colors must be separated by at least 1/2” to allow for color movement. Please note that some color overlapping may occur. More than 1 spot color imprinting is not available on some products. Minimum requirement for line thickness is 1 stroke point. Reverse out printing line thickness is 2 stroke points to avoid losing fine details.
HALFTONES - For best results, halftones should range from 20% to 40%. Our standard halftone printing is 35LPI, at a 45 degree angle. Artwork containing halftones must be pre-approved by PWS. See graphic on the right displaying our standard halftones.
PLEASE NOTE: Artwork with a border, large coverage and/or fine print is not recommended as it may not produce a good quality imprint. Boxed artwork exceeding 5"x5" will need approval. Submit for review.
CLICK HERE to view our FLEXO INK COLOR CHART.